View Categories

Manipulate custom maps

Table of Contents

On the custom map page, you can register an original map image and place a camera icon on it for viewing.

NOTE

The images are from an integrated video management system, but the basic operation method is the same.

Custom Map Screen
NOTE
  • The custom map view has a hierarchical structure. This mirrors the folder structure of the “Standard” view in the sidebar of the camera detail screen.
  • Map images can be registered in each corresponding folder.

Camera detail screen

Custom Map Screen

WARNING
  • Folders cannot be added from the Custom Map screen.
  • If you want to add a folder, please refer to the following page to add a folder and then move the target camera under the folder.
    ⇒ ” Camera Folder Management

Register a custom map #

Refer to ” Camera Folder Management ” and add folders from the camera detail screen.
Open the Custom Map screen and click on “Register Map” from the sidebar or main screen.
When the following screen appears, click the clip icon or text box, select the map image you wish to register, and click [ Determination ].

This procedure registers a “Fukuoka.png” image in the “Fukuoka” folder.
(*.jpg or *.png file formats can be registered. The maximum image file size is 10 MB)

Confirm that the map has been registered as shown in the figure.

Similarly, other maps are registered.

Registering a camera on a custom map #

In this example, the camera is registered to a custom map named “Tokyo”.

WARNING

If you move a camera from the camera detail screen, the information you set (map and map markers) will be deleted, so you will need to register the map again.

Refer to ” Camera Folder Management ” and add the camera to the Tokyo folder.
Click on the custom map “Tokyo”.
Click on the flag icon next to the camera icon belonging to the “Tokyo” folder.
Set the following in “Marker Settings”.

Icon: Select the marker icon from “Bullet type” or “Dome type”.
Color: Select the color of the marker icon.
Show name: Select whether or not to show the name of the marker.
Angle (displayed only when the icon is “Bullet type”): Adjusts the angle of the icon.
Size: Adjust the size of the icon.

カメラマーカーのアイコンの色設定について

You can select a color with the color picker or enter a hexadecimal number to set the color.

After setting the position of the camera icon by dragging, click Save.
Move the cursor over the camera icon to confirm that the thumbnail of the registered camera is displayed.

Click on a thumbnail to open the camera detail page.

Change/delete cameras from the map #

Click on the flag icon of the camera you want to change or delete.

Change the camera icon #

[Click Edit.
In “Marker Settings,” edit the following

Icon: Select the marker icon from “Bullet type” or “Dome type”.
Color: Select the color of the icon.
Show name: Select whether or not to show the name of the marker.
Angle (displayed only when the icon is “Bullet type”): Adjusts the angle of the icon.
Size: Adjust the size of the icon.

Change the position of the icon on the map and click Save.

Delete the camera icon #

[Click Remove from Map.
Click “Yes” when the confirmation screen appears.

Change/delete custom map images #

Click on the three dots icon of the custom map you wish to modify/delete.

Change Map Image #

[After clicking Change Map Image, the Register Map screen will appear, select an image and click Decision.

Delete map image #

[Click [ Delete Map ] and a confirmation window will appear, click Yes.

What are your Feelings
Scroll to Top