Set up the camera for authentication and start of use.

Configure the camera’s authentication and startup settings.
The startup setting is required before recording can be performed.

1. Click on the icon of a detected camera and click on General Settings.
   
   
2. Click on “Settings” under “Camera Credentials”.
   
   
3. After entering the user name and password, click “Setup” to close the window.
   For user name and password, please refer to the website of each camera manufacturer or contact the manufacturer.
   
   
4. Then click Start Using under the camera name.
   
   
5. Click Yes when the following confirmation screen appears.
   
   
6. When you start using the camera, the icon to the left of the camera name will change to .