View Categories

About factory default settings

Table of Contents

This section describes the factory default settings for the Edge Gateway.

network #

eth0: dhcpv4
lan0:
lan1:
lan2:
lan3:
br0: 192.168.0.254/24
– lan0/lan1/lan2/lan3

Initial Account #

  • ID: admin
  • PW: No setting (set at first login)

initial host name #

  • amnimo

Server Settings #

serversetting (of a computer or file, etc.)
SSH Serverinvalid
DHCP Serverinvalid
DNS Servervalidity
IPsecinvalid
NTP Serverinvalid
Syslog server (local storage)validity
Syslog server (forwarding)invalid
NxWtiness Servervalidity
Device Management System Servervalidity
GUI (HTTP server)Valid*.
remote.itinvalid
NOTE

*If your gateway version is V1.1.2 or earlier, the default DNS server settings are disabled and there is no GUI function. when updating from V1.1.2 to V1.2.1 or later, if DNS is not configured, it will be disabled. the GUI is disabled.
Note that the version can be checked using the CLI and GUI functions. Please see below for details.

PoE Configuration #

All ports are configured as follows

  • Power supply: Enabled
  • Startup delay time: 0 sec.
  • Current limit: auto

packet filtering configuration #

Index
Number		ポート
番号		protocolDescription.From / Tosetting (of a computer or file, etc.)policy
100137, 138udpNetBIOS Name Service
NetBIOS Datagram Service		destination (of transmission)transferdrop
110137, 138udpNetBIOS Name Service
NetBIOS Datagram Service		sendertransferdrop
120137tcpNetBIOS Name Servicedestination (of transmission)transferdrop
130137tcpNetBIOS Name Servicesendertransferdrop
140139tcpNetBIOS Session Servicedestination (of transmission)transferdrop
150139tcpNetBIOS Session Servicesendertransferdrop
160445tcpDirect Hosting of SMBdestination (of transmission)transferdrop
170445tcpDirect Hosting of SMBsendertransferdrop
What are your Feelings
Scroll to Top