The camera patrol is performed as follows
実行したい巡回定義の行にある、
をクリックし、[ 実行 ] をクリックします。
をクリックし、[ 実行 ] をクリックします。
Perform patrols.
| Conducting patrols |
Compare the normal image with the live image and enter a comment. （Click [Normal Image (Spacebar)] or press the spacebar to switch between the live image and the normal image. You can also click on  in the lower left corner of the screen and select “View Side by Side” to compare them side by side as shown below. Click to select one of the confirmation results, “No abnormality/No abnormality/Skip. ” (The selection can be changed after clicking.) Snapshots are automatically taken when live video playback begins for the report described below. If necessary, snapshots can also be taken manually by clicking on the camera icon. Click on a confirmation result to go to the next camera, and select a confirmation result in the same way. (You can also go to the next camera by clicking on < > on either side of the confirmation result.)When the tour finishes, the “Publish Report” button is enabled.  |
Report Issued.
WARNING
- The created report will not be saved on the Integrated Video Management System. [Clicking Cancel will result in the loss of the description.
- If you wish to save the report, save it as a PDF from the Preview/Print menu or print it.
| Publication of Reports |
| After the camera patrol is completed in step 2, click on “Report Issuance. The report generation screen will appear, fill in the “Report Title,” ” Reporting Person,” “Patroller,” and “Overall Report ” fields, and click Preview/Print.  A print preview screen will appear, so check the contents and print or output to PDF.  |
