amo Portable
- Introduction
- Steps to start using the service
- screen configuration
- Tenant Management
- Password reset
- Tenant switching
- Member Management
- Application Management
- Introduction.
- Basic Specifications
- list of authorities
- 1. set up the device
- Log in to Device Management System
- 3. register authentication information
- Activate the device
- Deactivate the device
- 5. detecting cameras
- Dashboard
- device list
- Edit Basic Information
- Manipulation of configuration files
- Update firmware
- Check device details
- Check information on connected devices
- PoE/USB start/stop/reset
- Get Syslog
- Manipulating Files
- Show history
- Initial configuration of remote.it
- Unregister a device
- Delete a service
- Unshare services
- Disable Services
- Connecting Services
- Installing AI Apps
- Delete AI Apps
- Connect to terminal
- Disconnect the terminal
- Device Profile Operations
- Storage Explorer Operation
- Alert Notification Feature Settings
- User Management
- Remotely reboot the device
- Automatic kitting.
- Configure multiple devices at once
- No progress in distributing or retrieving configuration files.
- Replace the device
- Devices assigned to tenants are not displayed
- Firmware update is not progressing.
- Device cannot communicate after initialization of configuration file
- Introduction
- [AC25] Mounting bracket for camera List of mounting holes by camera
- Precautions for this document
- Protected: amnimo C Series
- IoT Router Outdoor Type
- Edge gateway outdoor type
- Compact router outdoor type with wireless LAN
- precautions
- Accessories (sold separately)
- Revision History
- Switching screens and saving initial images
- Basic Specifications
- About this Product
- Edit Service
- Revision History
- Configure GUI settings
- Configure remote.it settings
- Nx Witness Setup.
- Set the DMS settings.
- Configure SYSLOG settings.
- CPU Operation Setting
- Configure PoE settings
- Set a schedule
- Configure storage settings
- Configure SSH settings
- Set the time
- Configure proxy server settings
- Configure DHCP relay settings
- Configure DHCP server settings
- Configure DNS settings
- Configure IPsec settings
- Configure NAT settings.
- Set the filter settings
- Configure static routing settings.
- Configure interface settings
- Configure PPP (PPPoE) settings
- Configure wireless LAN settings
- Configure mobile communication settings
- Configure group settings
- Set up your account
- Set the time zone
- Set the host name
- Configure package repositories
- Viewing the User's Manual
- Download Amnimo Diagnostic Information
- Operate Amnimo setting information.
- Operate the firmware
- Restart or stop the product
- Check operational information
- Check equipment information
- Configure simple settings
- Screen configuration of this product
- Change Password
- Sign in / Sign out
- About This Book
- Network Configuration
- Introduction
- Licenses and Trademarks
- Help
- Perform camera patrol
- Add a camera patrol
- Configure event notification settings.
- Create a report
- Listening to the audio of the video and outputting audio
- PTZ operation
- Set the fisheye correction setting.
- Update camera credentials
- list of authorities
- Change the display format of a custom map view
- Manipulate custom maps
- personalization
- Delete Camera Patrol
- Edit Camera Circuit
- Change status from the event notification screen
- Change multiple event statuses at once
- Change event status
- Output event information as a report (if you have applied for this function)
- Enter the details of your response to the event
- Download videos of events as they occur.
- Obtain a snapshot from the video when the event occurs
- Check the map for the location of the camera where the event occurred.
- Play Events
- Playback of event notification screen video in Direct mode
- Switch between corrected and original screens (fisheye-corrected images)
- Download videos of events as they occur.
- Obtain a snapshot from the video when the event occurs
- Detect camera events on the map
- Check the map for the location of the camera where the event occurred.
- Change the status of an event
- Event notification icon and notification sound
- Pause, resume, cancel, or detail requests
- Create a bulk download request
- Toggle display of fisheye-corrected images
- Delete videos and images
- Rename videos and images
- Rename videos and images
- Download videos and images
- Unsupported Alerts
- Change thumbnail placement and screen switching speed
- Delete Viewer
- Adding viewers and cameras to the video wall
- Create a time-lapse video
- Change the display format of a custom map view
- Change/delete areas and icons
- Open a lower level map from a higher level map.
- Register a camera icon on the map
- Obtaining snapshots
- smart search
- Play the video
- Other Functions
- Retrieve video clips
- Obtaining snapshots
- Manipulate images when an event occurs
- Delete camera
- Adding Tags to the Camera
- Change the display name of the camera
- Camera folder management
- Operating the camera's power supply (PoE)
- Reboot the device
- Disable the device
- Change device name
- 4. set up the camera for authentication and startup
- 3. detecting cameras
- Set up authentication information for VMS
- 1. activate the device
- User Management
- common setting
- Search Events
- What is batch downloading?
- Sort videos and images
- Play audio from saved videos
- Playback saved videos and images
- Enable streaming functionality
- Playback of video wall screen
- Configure video wall settings.
- Open custom maps from various locations.
- Set the initial display position of the map
- Delete the camera icon
- Edit the camera icon
- Retrieve video clips
- Zoom function
- Shift to direct mode and play VOD
- LIVE Video Playback
- Camera search and display
- View camera images
- Result upon completion of the request
- Revision History
- trademark
- License
- Connect to services using remote.it
- Configure remote.it settings
- Create a remote.it account
- What is remote.it?
- Activate the device
- What is Device Management System?
- Set up the camera for authentication and start of use.
- Detecting cameras
- Configure authentication information for VMS
- Enable Edge Gateway
- What is an Integrated Video Management System?
- Configure Nx Witness settings.
- Type of VMS
- Configure amnimo VMS settings.
- Connecting to a network camera
- Device repeatedly reboots
- Save settings to device
- Configure storage settings
- Configure PPP settings.
- Set the time
- Configure simple settings
- First sign in
- Change the IP address of the PC
- Edge gateway (outdoor version)
- Overall system diagram
- Configure SSH settings
- Edge gateway (indoor version)
- What you need to prepare
- Confirmation of Packaged Goods
- About This Book
- About Edge Gateway
- Safety Precautions
- Introduction
- What is remote.it?
- Introduction
- Use in access point mode
- Use in station mode
- Configure simple settings
- First sign in
- Change the IP address of the PC
- Compact router with wireless LAN (outdoor version)
- Compact router with wireless LAN (indoor version)
- Compact router (indoor version)
- Accessories we sell (sold separately)
- What you need to prepare
- Revision History
- License
- Confirmation of Packaged Goods
- Overall system diagram
- About This Book
- About Compact Routers
- Safety Precautions
- What is Device Management System?
- Confirmation of License Key
- Activate remote.it and register the service
- Connect to services using remote.it
- License
- Revision History
- Introduction
- Safety Precautions
- About AI Edge Gateway
- About This Book
- AI Edge Gateway (indoor version) activation and connection
- Overall system diagram
- What you need to prepare
- Accessories we sell (sold separately)
- Confirmation of Packaged Goods
- What is Device Management System?
- Connecting to a network camera
- Accessories we sell (sold separately)
- Introduction
- Safety Precautions
- About IoT Routers
- Manual List
- About This Book
- IoT Router Set
- Accessories we sell (sold separately)
- What you need to prepare
- Overall system diagram
- IoT Router (indoor version)
- IoT Router (outdoor version)
- What is Device Management System?
- Revision History
- About Camera Mounting Bracket Sets
- Single Pipe Installation
- Pole Installation
- About wall installation
- Order of cover screw tightening
- Internal wiring and wiring treatment
- When using PF pipe connectors
- When using a cable gland
- About power supply connection
- Outline Drawing
- Pole Installation
- About wall installation
- Internal wiring and wiring treatment
- When using PF pipe connectors
- When using a cable gland
- About power supply connection
- Outline Drawing
- Pole Installation
- About wall installation
- Internal wiring and wiring treatment
- When using PF pipe connectors
- When using a cable gland
- About power supply connection
- Outline Drawing
- Cases in which free replacement is not applicable
- About Repair
- Disclaimer of Liability for this Product
- Installation Precautions
- Precautions for Wireless Communications
- To use this product safely
- Safety and Modification Precautions
- Handling of the main unit
- Camera folder management
- Camera search and display
- common setting
- Open a lower level map from a higher level map.
- Manipulate custom maps
- Edit the camera icon
- Switching screens and saving initial images
- Retrieving Video Clips
- Obtaining Snapshots
- Playback of past video recordings
- Create a report
- Fisheye correction setting
- Delete camera
- Reboot the device
- Set up the camera for startup.
- Setting up recording
- Set up the camera for authentication and start of use.
- Detecting cameras
- Device Activation
- personalization
- User Management
- Help
- Sort videos and images
- Delete videos and images
- Rename videos and images
- Download videos and images
- Advanced search for videos and images
- Playback videos on the camera detail page
- Playback saved videos and images
- Enable streaming functionality
- Video Wall Screen Operation
- Configure video wall settings.
- Delete Viewer
- Change thumbnail placement and screen switching speed
- Adding a Camera to the Video Wall
- Open custom maps from various locations.
- Change/delete areas and icons
- Set the initial display position of the map
- Delete the camera icon
- Register a camera icon on the map
- LIVE Video Playback
- Check status and stop service
- Setting up recording
- View detailed information about the camera
- Disable PTZ operation
- Update camera credentials
- Adding Camera Tags
- Change the camera display name
- Operating the camera's power supply (PoE)
- Disable the device
- Change device name
- Adding the stream URL to the camera settings
- Add a camera
- Introduction.
- Delete a folder
- Create subfolders
- Create a folder
- list of authorities
- Basic Specifications
- Configure VMS settings.
- Introduction
- License
- trademark
- model number
- Maximum Transmission Power
- Supported frequency bands
- Notes on this document
- Manual List
- How to see compatible models
- Safety Precautions
- Handling of Edge Gateway main unit
- Precautions for Wireless Communications
- For emergency and other situations requiring continuous connection
- Edge Gateway Installation Criteria
- Disclaimer for this Edge Gateway
- Support for Various Standards
- Names and roles of the various parts of the Edge Gateway
- interface
- Edge Gateway Product Specifications
- About factory default settings
- Environment in which GUI functions have been tested
- Dustproof and waterproof performance
- Install an edge gateway
- Connecting Edge Gateways
- Activate the Edge Gateway
- Shutdown
- Reboot.
- Update Package
- Update firmware
- For actual use of the Edge Gateway
- Revision History
- Introduction
- model number
- Supported frequency bands
- Maximum Transmission Power
- Notes on this document
- Manual List
- How to see compatible models
- Safety Precautions
- Precautions for using wireless communication
- For emergency and other situations requiring continuous connection
- Compact Router Installation Criteria
- Disclaimer for this Compact Router
- Support for Various Standards
- Names and roles of each part of the compact router
- Compact Router Product Specifications
- About factory default settings
- Environment in which GUI functions have been tested
- Dustproof and waterproof performance
- Install a compact router
- Connecting a Compact Router to a PC
- Revision History
- To actually use the compact router
- Update firmware
- Reboot.
- Activate the compact router and log in.
- interface
- Introduction
- model number
- Support for Various Standards
- Names and roles of each part of the AI Edge Gateway
- AI Edge Gateway Interfaces
- AI Edge Gateway Product Specifications
- Dustproof and waterproof performance
- Install an AI Edge Gateway
- Connecting AI Edge Gateways
- Activate the AI Edge Gateway
- Shutting down the AI Edge Gateway
- Update the firmware of the AI Edge Gateway
- Revision History
- Supported frequency bands
- Maximum Transmission Power
- Safety Precautions
- Precautions for Wireless Communications
- For emergency and other situations requiring continuous connection
- AI Edge Gateway Installation Criteria
- Disclaimer for this AI Edge Gateway
- About factory default settings
- Environment in which GUI functions have been tested
- Reboot the AI Edge Gateway
- Updating the AI Edge Gateway Package
- For actual use of AI Edge Gateway
- Notes on this document
- Notes on this document
- Manual List
- Manual List
- How to see compatible models
- Safety Precautions
- Handling of the IoT Router itself
- Precautions for Wireless Communications
- For emergency and other situations requiring continuous connection
- IoT Router Installation Criteria
- Disclaimer for this IoT Router
- Support for Various Standards
- Names and roles of each part of the IoT router
- interface
- IoT Router Product Specifications
- About factory default settings
- Environment in which GUI functions have been tested
- Dustproof and waterproof performance
- Install an IoT router
- Connect an IoT router
- Activate the IoT router
- Shutdown
- Reboot.
- Update Package
- Update firmware
- To actually use the IoT router
- Introduction
- model number
- Supported frequency bands
- Maximum Transmission Power
- Revision History
- About This Book
- Introduction
- Connect to this product via CLI
- Launch the CLI for this product
- Overview of the CLI for this product
- Change the operation mode
- Execute command
- Use convenient functions
- CVR setting.
- Manage device tags in bulk
- Set up a custom map.
- Set up a custom map.
- Transition from the video wall to the camera detail screen
- Other Functions
- Transition from the video wall to the camera detail screen
- Activate and connect AI Edge Gateway (outdoor version)
- Introduction
- Product Handling and Precautions
- Name of each part
- (technical) specification
- Mobile Network Settings
- Troubleshooting
- Wireless LAN Settings
- Transmission of recorded data
- Start and stop recording
- Amnimo Portable Power Supply Operation
- not covered by warranty
- Warranty conditions
- Display the launcher screen
- Basic router settings
- Prepare camera setup file
- Importing camera configuration files to the router
- Initial Setup of Cloud Video Recorder
- operation check
- Playback of Amnimo portable video recordings
- Amnimo Portable Initial Setup
- Listen to the camera's audio
- What you need to prepare
- Introduction
- About factory default settings
- list of authorities
- Monitor external devices for dead or alive status.
- Name and role of each part of the sensor connection gateway
- Sensor connection gateway interface
- Sensor Connection Gateway Product Specifications
- Install a sensor connection gateway
- Connecting sensor connection gateways
- Activate the sensor connection gateway and log in
- Shut down the sensor connection gateway
- Reboot the sensor connection gateway
- Update the sensor connection gateway package
- Update the firmware of the sensor connection gateway
- Activation and connection of sensor connection gateways
- CLI User's Manual (PDF)
- Access control based on sign-in source IP address
- Power button operation
- Setting up multi-factor authentication
- PTZ operation
- Search for target devices in the Task Scheduler
- Various settings
- Sign-in with multi-factor authentication
- Various settings
- Dashboard
- Configure simple settings
- For customers using firmware v.3.2.0 or later
- Simple configuration (FW v.3.2.0 or later)
- Product Overview
- About This Book
- Safety Precautions
- Precautions for using wireless communication
- Note on lithium-ion batteries
- For emergency and other situations requiring continuous connection
- Amnimo Portable Installation Criteria
- Disclaimer of Liability for this Amnimo Portable
- Support for Various Standards
- Confirmation of Packaged Goods
- Accessories we sell (sold separately)
- How to remove the battery cover
- Previewing Recordings
- Check device information and update apps
- screen lock
- SIM Card Setup
- Network Configuration
- Revision History
- Check sign-in history
- Wireless LAN
- CVR
- IPsec
- Domain Name System
- storage
- PPP( PPPoE )
- DHCP Server
- NAT
- Mobile Communications
- interface
- firmware
- SYSLOG
- proxy server
- SSH
- Power Over Ethernet
- filter (esp. camera)
- routing
- Schedule
- Amnimo Setting Information
- package repository
- account
- time
- remote.it
- DHCP Relay
- Contact change history
- Nx Witness
- Your settings are not saved on the device." About alerts for
- DMS
- GUI
- Ascending / Descending order switching of the list
- Updated with the latest information
- View All Steps
- Restart/Stop
- VMS
- host name
- Amnimo Diagnostic Information
- users' manual
- Sign in / Sign out
- Change Password
- Check the firmware version
- network diagnostics
