Skip to content

amnimo Manual Library

amnimo Manual Library

amnimo Manual Library

amnimo Manual Library

Encyclopedia
online-manual
test

Step 3 Configure the AI Edge Gateway

Introduction

2

License
Introduction

Safety Precautions

1

Safety Precautions

About AI Edge Gateway

1

About AI Edge Gateway

About This Book

1

About This Book

Confirmation of Packaged Goods

1

Confirmation of Packaged Goods

What you need to prepare

2

What you need to prepare
Accessories we sell (sold separately)

Overall system diagram

1

Overall system diagram

Step 1 Activate/connect

3

Activation and connection of sensor connection gateways
AI Edge Gateway (outdoor version) activation and connection
AI Edge Gateway (indoor version) activation and connection

Step 2 Sign in

3

First sign in
Change the IP address of the PC
First time sign-in (FW v3.1.1 or earlier)

Step 3 Configure the AI Edge Gateway

7

Configure simple settings
Simple configuration (FW v.3.1.1 or earlier)
Set the time (FW v3.1.1 or earlier)
Configure SSH settings (FW v3.1.1 or earlier)
Configure PPP settings (FW v3.1.1 or earlier)
Configure storage settings (FW v.3.1.1 or earlier)
Save settings to device (FW v3.1.1 or earlier)

Frequently Asked Questions

1

Device repeatedly reboots

Connecting to a network camera

1

Connecting to a network camera

Configure VMS settings

2

Type of VMS
Configure Nx Witness settings (FW v3.1.1 or earlier)

Configure the enhanced video management system.

5

Enable Edge Gateway
Configure authentication information for VMS
Detecting cameras
Set up the camera for authentication and start of use.
What is an Integrated Video Management System?

Configure device management system settings

2

What is Device Management System?
Activate the device

Configure remote.it settings

5

Configure remote.it settings
Create a remote.it account
Configure remote.it settings (FW v3.1.1 or earlier)
Connect to services using remote.it
What is remote.it?

Licenses and Trademarks

2

License
trademark

Revision History

1

Revision History

View Categories

Home
amnimo Manuals
AX Series Startup Guide

Step 3 Configure the AI Edge Gateway

Configure simple settings
Simple configuration (FW v.3.1.1 or earlier)
Set the time (FW v3.1.1 or earlier)
Configure SSH settings (FW v3.1.1 or earlier)
Configure PPP settings (FW v3.1.1 or earlier)
Configure storage settings (FW v.3.1.1 or earlier)
Save settings to device (FW v3.1.1 or earlier)

All rights reserved by amnimo Inc.

Scroll to Top