View Categories

Edge gateway (indoor version)

   

Insert the SIM card to be used into the back of the Edge Gateway.
NOTE

Insert the SIM card so that its contacts are on the bottom.

WARNING

Use of a SIM size conversion adapter is deprecated as it may cause damage to the SIM slot.

Connect the LAN0 port of the Edge Gateway to the PC using a LAN cable.
Set the configuration DIP switch on the front of the Edge Gateway to Linux boot mode.

DIP Switch Icon Description

DIP SwitchDescription.
ON state
OFF state
NOTE

No. 4 DIP switch can be either ON or OFF. It is not referenced by the boot loader (used only on the application side).

Connect the AC adapter to the edge gateway.

Power is automatically turned on and the edge gateway is activated.

エッジゲートウェイ(屋内版)をシャットダウンするには

Shutdown can be accomplished in one of the following ways During shutdown, the LED PWR will flash; when the LED PWR turns red, the shutdown is complete.

  • While the equipment is operating (the startup process is finished and the equipment is fully up), turn off the power by pushing in the PUSH switch on the main unit with a thin object with a sharp tip for at least 3 seconds.
  • Shut down with the following command

admin@amnimo:~$ sudo systemctl poweroff
[sudo] password for admin: ← Enter root password and Enter
Stopping Docomo of user admin.
Stopping Unpack initramfs on shutdown...
(Omitted)
Starting Power-Off
NOTICE: You can turn off the power.

LED indication during shutdown process

(data) item PWRANTMOBST1ST2ST3remarks
shutdown process in progress500ms interval
power disconnected (state)

Scroll to Top