Table of Contents
When configured as described in this manual, the following optional accessories must be provided.
CAUTION
Optional items are not included in the warranty coverage of the AI Edge Gateway and Sensor Connection Gateway.
- Please refer to the amnimo X Series AI Edge Gateway User's Manual for specifications and standards.
AI Edge Gateway (indoor version) (AX11) #
| name of product | figure | Part Number | Specifications and Remarks |
| AC adapter (24V DC/2A) |  | M7901YA | DC24V/2A 30W load 60°C environment AC adapter + AC power cable 1 pair |
| AC adapter (DC12V/1A) |  | M7901YC | DC12V/1A 6W load 60°C environment 1 pc |
| rod antenna |  | M7901YD | For 3G/LTE/WiMAX 2 pcs. |
| External antenna (2.5m) |  | M7901YE | Coaxial cable length 2.5 m (gray) Antenna section with magnet 2 pcs. |
| External antenna (5m) | | M7901ZL | Coaxial cable length 5m (black) Antenna section with magnet 2 pcs. |
| GPS Antenna |  | M7901YP | Cable length 5m with magnet (only compatible frequency GPS) 1 cable |
| Main body fixing metal fittings |  | M7901YJ | 1 main unit 4 fixing screws |
| console conversion |  | M7901YG | RJ-45 - D-Sub 9-pin 1 pc |
| DC power cable |  | M7901YK | Power connector one end untreated Cable length 1m 1 piece |
CAUTION
- The main unit fixing bracket must be attached to the main unit of the Edge Gateway (indoor version) using the supplied fixing screws.
- Please prepare the screws for fixing the main unit to the wall by yourself.
AI Edge Gateway (outdoor version) (AX21) #
| name of product | figure | Part Number | Specifications and Remarks |
| Rainproof AC cable |  | M7901YV | 5m with round crimp terminal OD 9.15mm 1 pc |
| Cable gland (for Ether cable) |  | M7901YQ | Applicable wire diameter 6 to 10 mm 1 piece |
| Cable gland (power supply only) |  | M7901YR | Applicable wire diameter 8-14mm 1 piece |
| Cable gland (for Ether cable) |  | M7901YY | Applicable wire diameter 4 to 6.6mm 1 piece |
| Cable gland (for 2 Ether cables) |  | M7901YZ | Applicable wire diameter 4.3 to 6.1mm 1 piece |
| Wall Mounting Bracket |  | M7901YX | Made of stainless steel 4 pcs. of body 4 pcs. of accessory mounting screws |
| Ball Mounting Bracket |  | M7901YW | Made of stainless steel Compatible pole/con pillar diameter 60-400 mm 2 pcs. of body 4 pcs. of attached mounting screws |
| Ball Mounting Band |  | M7901YU | Stainless steel Applicable pole/con pillar diameter 60-400 mm 2 pcs. |
NOTE
- AI Edge Gateway (outdoor version) uses BCPK203015S manufactured by TAKACHI ELECTRIC INDUSTRY CO. Genuine Takachi Denki Kogyo products that are compatible with the said chassis can be used.
- For PF pipe connectors, Furukawa Electric's PFS-16BKSR-1 (waterproof PF pipe connector IPX5), Mirai Kogyo's FPK-16YPS (waterproof PF pipe connector IPX7) and similar products are available.
Sensor connection gateway (AX30) #
| name of product | figure | Part Number | Specifications and Remarks |
| AC adapter (24V DC/1A) |  | M7901ZK | DC24V/1A 15.6W load 60°C environment 1 pc |
| rod antenna | | M7901YD | For 3G/LTE/WiMAX 2 pcs. |
| External antenna (2.5m) | | M7901YE | Coaxial cable length 2.5 m (gray) Antenna section with magnet 2 pcs. |
| External antenna (5m) | | M7901ZL | Coaxial cable length 5m (black) Antenna section with magnet 2 pcs. |
